1. Inizio pagina
  2. Contenuto della pagina
  3. Menu principale
  4. Menu di Sezione
Componenti
Contenuto della pagina

Pressure accumulator  EHV/EHVF Maintenance

 
 

It is advisable to check the nitrogen precharge with the appropriate instrument every 6 months using the appropriate VGU instrument. The control must be done with the machine or plant stopped and at room temperature. In the case in which the value of the preload has dropped below 10% of the initial value, it is necessary to intervene to restore it. If the preload is close to zero or zero, it is very likely that the inner bag will be damaged or broken. In this case, contact us for suggestions on how to proceed or agree to send the accumulator to us where, after a check, we will send an estimate to restore the damaged battery or replace it with a new one. If you have the equipment and / or experience we can send you the original spare parts to proceed with the review of the accumulator. for the disassembly of the accumulator it is advisable to install an element on the circuit that separates it from it. This is the purpose of the special DI series safety blocks.

Important:
It is essential to use dry nitrogen in a cylinder equipped with a reducer. The use of other gases such as air or oxygen is strictly prohibited due to the risk of explosion


COMER ACCUMULATOR SERVICE CENTRE

COMER ACCUMULATOR SERVICE CENTRE

From 2019 COMER is officially the Parker/Olaer Accumulators
service center. Comer has all the appropriate equipment and large spare parts
warehouse to perform checks on the preloads, internal bag replacements and
interventions in general on the whole range of accumulators in production both
Parker and Olaer.

 

High pressure accumulator  EHV/EHVF Maintenance
 
 
 
 
  1. Disassembly and Assembly Instructions
  2. EHV/EHVF Accumulators series
 

UTILITY FILES:

 
 
CONTACT US

For requests for information, quotes
and customized solutions

FILL IN THE FORM