Hydraulic accumulators - Verifier/Inflator VGU
The VGU Verifier Kit is the tool for checking, increasing or decreasing the accumulator preload value. it is advisable to check the pressure every 6 months. The control must be done with the machine or plant stopped and at room temperature. In the case in which the value of the preload has dropped below 10% of the initial value, it is necessary to intervene to restore it. If the preload is close to zero or zero, it is very likely that the inner bag will be damaged or broken. In this case it is very advisable to contact us for suggestions on how to proceed or agree to send the accumulator to us.
COMER ACCUMULATOR SERVICE CENTRE
From 2019 COMER is officially the Parker/Olaer Accumulators
service center. Comer has all the appropriate equipment and large spare parts
warehouse to perform checks on the preloads, internal bag replacements and
interventions in general on the whole range of accumulators in production both
Parker and Olaer.
Download product details >>PRODUCT DESCRIPTION
- The precharge kit case contains:
- VGU body
- 2 manometers 0...25 bar and 0...250 bar
- Tube for connection to the nitrogen
- cylinder
- Adapters for nitrogen valves of most of accumulators type
- Gasket kit
SUPPLY
Complete case for checking the
accumulator preloads in the workshop or on site.
In case of recharge it is necessary to have a nitrogen
cylinder.