Contenuto della pagina
Flowmeters Type MK
Flowmeters Type MK
The union connections allow rapid installation and reduce maintenance times. The standard structure is in antacid PVC. Max. operating temperature up to 100°C. On request, it can be equipped with a min/max flow rate indicator. Maximum working pressure: 10 bar, accurancy : ±5%.
- PL
PRODUCT DESCRIPTION
- Applications: Medium Flowrate
- Fluids: clean liquids or gases
- Precision: ±5% fs.
- Maximum working pressure: 10 bar
- Maximum working temperature: 70°C
- Body: Policarbonate atoxic
- Connection: PVC
- Seal: NBR
- Threaded connection
Download Product details >>SUPPLY
- The models and flow rates in the flowmeters in the catalog always refer to use with water and air. With the use of air or gas in general, the flow rates are always referred to use at a temperature of 20 ° C and at atmospheric pressure. When the flow meters are installed inside a closed circuit, the pressures inside the instrument can be different from the atmospheric pressure. In this case, being compressible gases, the instruments must be calibrated and sized according to the process data. This is because otherwise the reading will be distorted.
INSTALLATION and SETTING
This extremely simple type of tools does not require special measures. The assembly of the flowmeters have precise directions. In a vertical position with flow from bottom to top. In the flow meters equipped with a regulation tap, in addition to the instantaneous flow rate reading, it is possible to adjust the output flow.