Contenuto della pagina

Adjustable Flow switches Type MR1

Adjustable flow switches with floating piston. For Gas and general fluids (water, oil etc). The calibration system, with safety lock, allows an accurate adjustment of the set value. The electrical connection is made by a DIN 43650 connector and PG9 cable gland. Maximum working pressure 200 bar. Maximum temperature 120 ° C. Working in any position.

: MR1

PRODUCT DESCRIPTION

Piston sensing element
Liquid and gas media application (Max 300 Cst)
Hermetic separation between flow and switch head
Nickel plated Brass or St. Steel body
Setting ranges from 0,4 to 60 l/min. (H2O)
Pmax up to 200 bar – 500 bar on request
Tmax up to 120°C
SPDT contact, 250 Vac – 50VA
Protection class IP65
Process connections from 1/4″ to 1” Gas-F

Adjustable Flow Switces type MR1 (106.7 KB)

Download Product details >> (106.7 KB).

SUPPLY

The models and flow rates in the flow switches in the catalog always refer to use at room temperature.

INSTALLATION and SETTING

This extremely simple type of tools does not require special measures. The adjustment of the intervention threshold is made by loosening the Allen screw and sliding the electric head on the body. Once the desired intervention point is found, it will lock in that position by screwing the Allen screw again. The working of these flow switches is permitted in every position.