1. Inizio pagina
  2. Contenuto della pagina
  3. Menu principale
  4. Menu di Sezione
Contenuto della pagina

Flowmeters Type BC-BCK


The “BC-BC/K” series flowmeters, suitable for medium and large flow rates of liquid and gaseous fluids. The instantaneous measurement of the flow is read on the graduated scale. The structure can be either flanged or threaded. Other characteristics: simple installation, easy maintenance, accuracy ±5%, maximum working pressure of metallic structures PN 16, for plastic structures PN 10. On request, they can be supplied with minimum/maximum flow rate indicator.



  1. Applications: Medium and large flow rates
  2. Usage: Liquid and gaseous fluids
  3. Accuracy: ± 5% of f.s.
  4. Max working pressure: 16 bar metal versions
  5.                                                 8 bar plastic versions
  6. Max working temperature: 120 ° C for metal structures
  7. Measurement tube: unbreakable non-toxic polycarbonate
  8. Float: AISI 316
  9. Seals: NBR - Viton


  • The models and flow rates in the flowmeters in the catalog always refer to use with water and air. With the use of air or gas in general, the flow rates are always referred to use at a temperature of 20 ° C and at atmospheric pressure. When the flow meters are installed inside a closed circuit, the pressures inside the instrument can be different from the atmospheric pressure. In this case, being compressible gases, the instruments must be calibrated and sized according to the process data. This is because otherwise the reading will be distorted.


This extremely simple type of tools does not require special measures. The assembly of the flowmeters have precise directions. In a vertical position with flow from bottom to top. In the flow meters equipped with a regulation tap, in addition to the instantaneous flow rate reading, it is possible to adjust the output flow.


For requests for information, quotes
and customized solutions