Flowmeters Type AM

The flowmeters type AM are suitable for measuring small fluid flow rates. They are manufactured in acrylic material with the conical measuring hole obtained directly in the body of the measuring device. The flowmeter is equipped with needle valve for adjusting and dosing the fluid to the required value. It is produced with angle, lateral or frontal connections.  It is particularly useful in gas therapy, purgation, analyses and level measuring.  Maximum working pressure: 10 bar, accurancy : ±5%.

The models and flow rates in the flowmeters in the catalog always refer to use with water and air. With the use of air or gas in general, the flow rates are always referred to use at a temperature of 20 ° C and at atmospheric pressure. When the flow meters are installed inside a closed circuit, the pressures inside the instrument can be different from the atmospheric pressure. In this case, being compressible gases, the instruments must be calibrated and sized according to the process data. This is because otherwise the reading will be distorted.

This extremely simple type of tools does not require special measures. The assembly of the flowmeters have precise directions. In a vertical position with flow from bottom to top. In the flow meters equipped with a regulation tap, in addition to the instantaneous flow rate reading, it is possible to adjust the output flow.